Forklift gear pump drive system common faults and solutions

The drive system is one of the systems commonly used to forklift gear pumps, but also one of the systems it often fails, then what are the common failures of the gear pump drive system of forklift truck? How to solve it? ? With these questions, then we will introduce the forklift gear pump drive system common failures and solutions. Forklift gear pump drive system common faults and solutions First, the clutch slippage or non-separation, the failure of the reasons are: 1, the friction plate stuck on the oil or friction plate damage, this treatment is to clean the friction plate or replace the friction Piece; 2, the separation of bearings combined with pressure on the lever in the separation above, this approach is to deal with the split rod assembly rod length shortened; 3, the bearing clearance is too large, this approach is to divide the pump assembly Put the rod to be long; 4, oil in the air, this approach is to drain the air inside the oil; Second, the gearbox has abnormal sound, the reasons for the failure are: 1, excessive gear wear or bearing damage , This approach is to deal with gear change or replacement of bearings; 2, there are debris gearbox, the solution is to rule out debris. Expand to read: China Construction Water Exhibition Pump Valve Pipe Fittings Exhibition Water Expo Xiamen Maritime Exhibition Internet + Forum Industrial Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Duanhui (QQ / WeChat:) http: // beng.liuti.cn/ (service hotline:)